-
EARLY MODEL REAR CALIPER WITH PADS ON THE 3 CALIPER BRAKE SYSTEM. THIS CALIPER IS HYDRAULIC AND CABLE OPERATED. See all pictures. -
This is for the Early Model 500-700 UTVs that have no Calipers in the Rear wheels, only the Caliper on the Rear Diff. This Kit has 3 parts. This comes with 2 rubber lines (1 at each end) that goes from the Master Cylinder then to the long Metal Line, back to a rubber line that connects to the Rear Caliper. -
HiSun Changed the Rear Caliper and the Pads. Please Measure yours to know if Type 'A' or 'B'. This is for Type 'A' (smaller). Type 'B' = 44701-120-0001 -
HiSun Changed the Rear Caliper and the Pads. Please Measure yours to know if Type 'A' or 'B'. This is for Type 'B' (bigger). Type 'A' = 44701-120-0000 -
This is the Rear Diff for the 2017-2024 Cub Cadet (MTD) it has the Locking Solenoid that switches from 1-WD to 2-WD. -
Out of stock
This is the Newer Style Rear Differential for the 2021ish and Up models. AXIS and Crew 750s. The I.D. of the Axle Seals are now 70mm (was 65 ) whick also must use the Newer 70mm Axles to fit. This also has the Yoke Mount with the Disc Plate Mount. Please Measure the I.D. of the Seal Size, 70 x 90 x 9 is for this Rear Diff. -
HiSun Factory REAR DIFFERENTIAL
Also known as Rear Axle Gear Bridge
We are Including a Free Accordion Boot
(This Seals out any Water or Debris)
WILL FIT HiSUN 500, 550, 700 UTV'S with
65x90x9 Axle Seals, other Late models have 70x90x9 Seals
Massimo, Supermach, Bennche, Colman,
Yardsport, Cub Cadet, Big Muddy, AXIS,
Rural King, and many more.
Fits Both Carburetor and EFI
From 2008 to 2022ish
-
This is the Needle Bearing for the HiSun non-locking rear diff. Pinion tip. Very difficult to replace.
-
HISUN Rocker Switch
for the Rear Diff 1-WD to 2-WD function
This is used 2015 - 2023 Models
(normally Bench Seat UTVs)
V-Twin 800, 900, 1000
(some newest 550-750 models)
-
This is the Rear Diff that can Switch from 1-WD to 2-WD with the front side mounted Solenoid Gear Motor.
Mainly for the 2017 -2024 Cub Cadet Challenger 550 and 750
It is possible to convert the normal 2-WD rear diff to this Turf Mode Diff. but 2 new rear axles would be needed.
