Complete with Bushing Bearings and Seals as Shown, Has 10mm Bolt Holes
-
Complete with Bushing Bearings and Seals as Shown, Has 12mm Bolt Holes
-
Complete with Bushing Bearings and Seals as Shown, Has 10mm Bolt Holes
-
Complete with Bushing Bearings and Seals as Shown, Has 12mm Bolt Holes
-
ODES Outer Clutch Cover
or known as CVT Belt Cover
These Are FACTORY ODES PART !
Fits ODES 800 Engines
(Not for 1000cc engines, see our other Listing)
We also have the Clutch cover 3 piece Bolt with Washer and Rubber Seal if needed. 21040302201
-
This is for the Early Model Dominator 2010-2014ish -
These Rings fit both the 800 and 1000 but the Pistons are different.
Space the Rings as shown. Middle Ring has Sharp Edges and Top Ring has Ronded Edges.
Letters Go Up on top 2 rings.
-
Front Steering Rack and Pinion
Odes name, 'Redirector'
Fits Dominator UTV800's 2011 and Up
UTV 1000 2015ish and Up.
This has the the All Aluminum Body see Pictures
-
Front Steering Rack and Pinion
Odes name, 'Redirector'
Fits UTV800 & 1000s 2020 - UP
**This has Longer Inner Steel Tube Mount **
Mainly Warrior Models and Some Odes UTVs
Newer 'Long Travel' Suspension
-
Factory Replacement Dual Fan RADIATOR !
Complete with, 2 Fans
Fits ODES 1000 UTVs
2019-2020 and Many more models
Please Study the Location of the 3 Hose Connections
This the Upgraded Radiator and can be Installed on most Odes UTVs
-
Factory Odes 800 Radiator
Complete with, 2 Fans
Fits ODES 800 UTVs
2011-2022 and Many more models
all other 800 Radiators have been Discontinued.
This is the only Odes 800 Radiator that has the Oil Cooler
(some brackets may need to be modified)
Please Study the Location of the 2 Hose Connections
This the Upgraded Radiator and can be Installed on most Odes UTVs
-
This Radiator Cap and Mounts Fits bot the HiSun and Odes Models.
The neck tube is 16.5mm O.D. and the mountung hole centers are approx. 60mm apart.
-
Out of stock
This Fan is the Factory Panasonic Fan for the Dual Fan Radiator. The Early model single radiator fan is no longer available, some minor modifications are needed and works well for the 2011-2015ish model with 1 fan only. -
This fits all (most) ODES UTVs !
-
FACTORY TEMPERATURE SENSOR
Radiator Fan Switch
Fits Odes V-Twins 800 and 1000 !
2012-2024
This installs in the Radiator
Make sure that 1 of the 2 plug end wires has 12v + with Key-On.
-
This is a Double Row Single Bearing normally for the Rear Knuckle of the Late Model X2 and X4 and most Long Travel 'LT' Suspension Models. -
This is the Controller to send power to the Lockable Rear Diff. From 1-WD to 2-WD. -
2017-2024 (Has New Square Locker)
Also known as Rear Axle Gear Bridge
Dominator LT X2, LT X4
**This is the Updated Rear Diff to replace Older Round Solenoid
that is not available any more. Mounts the same and uses that same axles.
** Has the New Style Plug End may need to be spliced (same 2 wires) **
-
This Repair kit is for 1 Rear Knuckle, replaces Top and Bottom Bushings. The inner Bushing Tube is for the 10mm O.D. Bolt (other size is 12mm) Simply remove the Nut from the upper or lower Knuckle Bolt and measure the O.D. of the threads. It will be closer to 10mm or 12mm. -
This Repair kit is for 1 Rear Knuckle, replaces Top and Bottom Bushings. The inner Bushing Tube is for the 10mm O.D. Bolt (other size is 12mm) Simply remove the Nut from the upper or lower Knuckle Bolt and measure the O.D. of the threads. It will be closer to 10mm or 12mm. -
These is the newest type Rear Knuckle that Uses the wide DAC Bearing and Circlip. Fits Late Model Odes X2 - X4 Dominator and AOdes JungleCross and others. -
These is the newest type Rear Knuckle that Uses the wide DAC Bearing and Circlip. Fits Late Model Odes X2 - X4 Dominator and AOdes JungleCross and others.
