-
This ECU is from all HiSun UTVs, Sport, Utility, 2 Seater and Crew. -
HiSun ECU/ECM Controller
For 'EFI' UTV MODELS 500 & 550
2011 - 2023
This has the Modified Chip Set with No Restrictions of
Seat Belts, 4x4, Reverse & adds 500 RPM
-
HiSun ECU/ECM Controller
HiSun ECU/ECM Controller
For 'EFI' UTV MODELS 500 & 550
2011 - 2023
This has the Modified Chip Set with No Restrictions of
Seat Belts, 4x4, Reverse & adds 500 RPM
These ECUs were used and sent to Delphi to be Reprogramed with the Limits Removed.
Only $100, normally $205
This is the Only ECU that comes with a 6 month Warranty !
-
This has the Modified Chip Set with No Restrictions of Seat Belts, 4x4 and Reverse with 500 More RPM ! -
This is the Harness that Plugs into the ECU, Fuel Injectors and most Engine Sensors. The Main Harness is what powers up this Harness. -
HiSun Fuel Filter or Gas Filter
Updated to Fit all Models using Standard Size Fitting of 8.5mm (.325")
FITS EFI MODELS
Fits Most HiSun 400, 450, 500, 550, 700, 750, 800, 1000 UTV'S
From HiSun and ODES
-
Same as 34200-120-0000 -
Straight Hose from Crankcase to Air Oil Separator , 10X15X110 -
Upper Vent Hose to Air Box. 11X15X140 WITH 90 DEGREE BEND. -
HiSun Valve Controller
or also know as Electro Magnetic Valve Controller
FITS UTV 800 and UTV 1000 MODELS
This is the Relay Box that sends the 12v Power to the
Rear Differential to turn On and Off the Solenoid to Lock or Unlock the Axles
WILL FIT ALL HiSUN 800 and 1000 UTV'S INCLUDING
Massimo, Bennche, HiSun, Coleman (and many more)
-
E.P.S.
Electric Power Steering
Fits HiSun 'Bucket Seat' 500 & 700, 750 UTV'S INCLUDING,
HiSun, Massimo, Bennche, Big Muddy, Q Link
Cub Cadet, Sams Club, Coleman, Rural King and TSC
Fits 2013 - 2021
Fits Bucket Seat HiSun UTVs,
(not the 2015-2021 BENCH Seat UTVs)
Comes with full Instructions
-
This is the Updated 3-Plug Box for the HiSun UTV. If your has a 4-Plug contoller, this is not compatible. -
This is the EPS Controller Box for HiSun and Odes that have 6-pin,4-pin,2-pin and 2-pin connectors Know as a 6x4 4-Plug EPS Control Box -
Out of stock
Not for the Vector Models or 400cc Models. 2015-Up Sector Series. -
This is the Rubber Mount Bushing for the Muffler it measures 30mm O.D the Hole is 8.5mm the width on the Inner Metal Tube is Approx 24mm and the Width of the Outer Tube is 17.25mm.
