14MM is the O.D. of the Threaded End of the Tie Rod and threads of the Tie Rod End by the Castle Nut.This fits most 2015ish and Up models, early models used the 12mm size.
HISUN Replacement Rocker Switch
for the H 2-WD to 4-WD function
This is used 2015 - 2023 Models
(normally Bench Seat UTVs)
450, 500, 550, 700, 750, V-Twin 800, 1000
Same as 37910-115S-0000
HiSun Starter Clutch or known as One-Way Starter Gear
Sold as a Set of 2 Mated Parts as Shown
THIS IS A FACTORY HISUN PART !
It fits all HiSUN EFI AND CARB 450-500-550-700-750
approx. 2008-2018 with standard 1:5 Crankshaft.
The Newer 2019ish and up has a 1:7 Crankshaft that has a Nut that holds on the Flywheel.
- Same as 47230-115S-0000
This Right (Clutch Side) Crankcase 1/2 is for the 700-750 Engines withe the Wet 5-Shoe Clutch. 2013-2020ish)The Oil Drain uses a Large 36mm Drain Cap/Nut and O'Ring, not the 14mm Drain Bolt (early 2008-2013ish)This case will NOT eccept the 6-Shoe Clutch or the newer 1:7 Crankshaft and Flywheel.
This Left (Magneto Side) Crankcase 1/2 is for the 700-750 Engines withe the Wet 5-Shoe Clutch.This case has the 36mm Oil Drain Cap Hole, Not the 14mm Drain Bolt Hole.
This Right (Clutch Side) Crankcase 1/2 is for the 700-750 Engines withe the Wet 6-Shoe Clutch.This case will eccept the standard 1:5 Crankshaft and the newer 1:7 Crankshaft and Flywheel.
This Leftt (Magneto Side) Crankcase 1/2 is for the 700-750 Engines withe the Wet 6-Shoe Clutch.This case will eccept the standard 1:5 Crankshaft and the newer 1:7 Crankshaft and Flywheel.
Up for Sale is a Complete 750 Engine.
This is for the Bench Seat Model 2015-2024
(Can be installed on the 2 Bucket Seat Model 500, 550 or 700 Also)
Engine comes compete as shown with the Updated Clutch and Throttle Body Cap.
We include the New Dual Stage Air Filter and extra Oil Filter
and 2 Exhaust Head Pipe Gaskets.
These Engine are Pre-Tested for 1 Heat Cycle to Pass H.P. Rating and EPA Emissions.
These Engines ship by Fed-Ex LTL Truck and
This Dual Stage Air Filter also Fits the Newest Cub Cadet Challenger Body Style and Mounts Horizontally.
This is for the HiSun Disc Mounting Shoulder Bolts sold as a pack of (4) M8 Bolts for 1 Disc.
Parking Brake Disc Hexagon Step Bolts
Set of (6) with (6) m6 Nuts (not shown)
These Are For the Center Parking Disc, Not on the Wheels/Hubs.
Fits HiSun 400, 450, 500, 550, 700, 700-4, 750, 800, 1000
ATVs and UTV'S
This Circlip Fits the Inner Spline Shaft of many axles for assembly. It has the I.D, of 20mm or .78" (just over 3/4").
This is the Updated Ball Joint now with a Grease Zerk added for Maintenance and Durability !
