-
This is the Larger of 2 Cover Rubber Seals the mounts between the Engine and Inner Clutch Cover.
-
This is the Larger of 2 Cover Rubber Seals the mounts between the Engine and Inner Clutch Cover.
-
Out of stock
Up for Sale is the Backrest only of the 2 pc. HiSun UTV 400 (UT 400) .
It measures just under 48" Wide and has fits 2011-2023 UTV 400 Models.
Please Study all pictures.
-
SEAT BELT, 3 Point SAFETY BELT ASSEMBLY
For the HiSun UTV 400, 500 & 700 & 700-4 Left or Right (Same)
This Seat is the Newest Style that has the Accordion Boot.
We also have the Seat Belt Buckle
IT FITS THE FOLLOWING MODELS: 2008 - 2024
UTV 400, 500 & 700, MSU 400, 500 & 700 Coleman, Axis and others.
-
For the HiSun and Odes UTVs.
450-500-550-700-750-800-1000 Left or Right (Same)
This Buckle is the Newest Style Approx. 12.75" Long
(let us know if you need a different length)
We also have the Seat Belt Assy, 3 Point Harness.
IT FITS THE FOLLOWING MODELS: 2008 - 2023
-
Out of stock
Up for Sale is the Bottom Seat of the 2 pc. HiSun UTV 400 (UT 400) Seat only.
It measures just under 48" Wide and has fits 2011-2023 UTV 400 Models.
Please Study all pictures.
-
This is the Rubber Grommet that mount is the frame to hold the Seat Towers in place. It is best to add some grease if too tight when removing the Seat. -
Cone Top Bolt for Seat Front Center Locker. Adjust with or remove washer if needed to make seat lock tight. This fits the Bucket Seat 500 and 700 (and some Crew) models. -
Out of stock
This Seat Fits the 400 UTV, 450 Vector and 500 Vector from HiSun, Home Depot,
Coleman, MSU, Bennche, Qlink, Big Muddy and more.
Both Both bottom Base and Backrest (2 pc.) are only sold together. Approx. 48" Wide.
-
Out of stock
Factory Replacement CLUTCH , SECONDARY CVT, Drive
Fits all EFI and Carburetor HiSUN
450, 500, 550, 700, 700-4, 750 UTV’S
2008-2024
INCLUDING, MASSIMO, SUPERMACH, COLEMAN, BENNCHE
TSC, CUB CADET, MENARDS YARDSPORT UTV ‘s
We also stock the Drive Belts and most other parts you might need
-
UP FOR SALESECONDARY CLUTCH
ODES 1000 FX-3, MXU 1000, Workcross, Warrior
'CV Tech' Factory, CVT, Drive Clutch
TrailBloc
This Secondary Clutch is Larger has been Spring Calibrated for this Model.
Fits ODES 1000 UTV'S with newest engine (see picture below)
that has the Rear Diff and Transmission in the same Cases.
-
To add or replace, use a Press to remove the spring loaded Circlip on the Spring side end of the Clutch.
Then the 4 Ramps with the Allen Head bolts need to be removed.
This spacer is normally for the ODES 800 that has a Solid Center Roller on the Primary.
This spacer allows the Secondary Clutch Plates to Open which also allows the CVT Belt to drop down and release pressure off the Solid Center Roller of the Primary Clutch.
Remember, the Belt should NOT turn at Idle ! (900-1,100 rpm)
-
The Long Arm UTV Sensor has been Discontinued and only the Shorter Arm 'ATV' is available and works well. You can bend the wire arm to help get the best reading.
